Transducer Y-Cable with MW

[allrelative]

I have 2 TZT3, one with 175HW and one with 175MW. I have a B164 installed that I do not use. Wondering if I could add a Transducer Y-Cable on the TZT3 with the 175MW, to show the Low from the B164.
So Chirp with CW.

Did not see it here

https://www.furunousa.com/-/media/sites/furuno/document_library/technical_info/interfacing_and_installation/interfacing_and_installation/tzt3_v2_selectable_transducers.pdf

I might have better luck pairing the 175HW / 175MW on one unit, then running the 164 on L on the other.
However, I like have the 175HW on full screen.

 

[Johnny Electron]

Kudos for checking the documentation. Those units are not currently a listed pair so could not be used on the same internal sounder.

 

[allrelative]

Thank you, -- So then my other option is pairing the 175HW / 175MW on one unit, then running the 164 on L on the other.
My guess the MW is so new the documentation has not been updated. Just a hunch.