Transducer Recommendation for TZT16F?

[CptMorgan]

We have new TZT16F MFDs onboard, but an old basic 50/200 transducer.

Can someone recommend a new transducer?
70' Yacht, max 20 kn speed
Through Hull mounted
We are not fishing off this big boat.
But we are anchoring in tight spaces, close to shore. Often near steep ledges. (PNW)
We moor in a river with turbulent, cloudy water.
I do like the CHIRP sounders for clarity and functions.

I've had great luck with the Raymairne and Garmin 3 in 1 / All-in-one CHRIP transducers like the RV-200 & GT51M-TH. Is there a similar all-in-one transducer for the TZT3?

 

[Titanic II]

You can run a side scan transducer to one of the TZT16F's for side scan.

To another TZT16F for bottom detail you can connect a HIGH frequency Chirp transducer.

https://furunousa.com/en/products/tzt16f Click on accessories.

 

[CptMorgan]

Thanks Titanic II

Strange, I only see two Chirp through hull on the "accessories" link B265 (no temp) & B275 (w/temp)
The B275LHW-12P looks okay, but it's rather large and expensive.

Is there a smaller Chip transducer that will work like the B175WH?

This may sound stupid, but is the DFF3D function built into the TZT16F? (for the 165T-50/200-SS260 Multi-beam w/ DFF3D)

 

[Titanic II]

The website is only showing the 12-pin transducers available. However, there are several other transducers that are compatible. The TZT16F comes with a 10-pin to 12-pin adapter cable to connect the 10-pin transducers.