What is a low cost (relative to the 275LHW PM I have backordered), 0 degree bronze thru-hull transducer that will work with my TZT3 12" 12P. I also have DFF3D, but I can wait on that.
I really just want basic fish and depth and be able to use my boat. Thankful I haven't cut for the pocket mount yet. I figure just a bronze transducer installed on the centerline in the middle of the keel as backup (Downeast style hull) aft of where I'll ultimately cut for and mount the PM transducer.
I am thoroughly confused by the charts and compatibility. If there is something that will work with DFF3d, great, but most transducers are "not in inventory." So depth, fish.
I really just want basic fish and depth and be able to use my boat. Thankful I haven't cut for the pocket mount yet. I figure just a bronze transducer installed on the centerline in the middle of the keel as backup (Downeast style hull) aft of where I'll ultimately cut for and mount the PM transducer.
I am thoroughly confused by the charts and compatibility. If there is something that will work with DFF3d, great, but most transducers are "not in inventory." So depth, fish.