PG-1000 wiring?

[emndive]

Hi All, i'm running a MFD12 set up and just purchased a PG-1000 heading sensor. Planning to run it via 0183 "port 3". Can any one steer me in the direction for wiring- PG to Port 3 ( blue/white -Blue-Green/White-Green wires. thank you!
PG-1000:
Green
Yellow
White
Black

 

[TheReaper]

If you have the 6-pin NMEA cable for the PG1000:
PG ----- Data 3
Wht ---> Blue
Blk ----> Blu/Wht

 

[emndive]

If you have the 6-pin NMEA cable for the PG1000:
PG ----- Data 3
Wht ---> Blue
Blk ----> Blu/Wht

Yes i have the 6 pin cable with 4 wires. White-Black-Green-Yellow. What is the PG and data 3 colored wire? Pardon my confusion.

 

[TheReaper]

The PG is the PG1000 6-pin cable (re: Wht wire and Blk wire). The Data 3 is part of the MFD12 18-pin Data 2 cable (re: Blu wire and Blu/Wht wire).
Bottom line...
Connect PG1000 white wire to MFD12 blue wire AND the PG1000 black wire to the MFD12 blue/white wire.

 

[emndive]

The PG is the PG1000 6-pin cable (re: Wht wire and Blk wire). The Data 3 is part of the MFD12 18-pin Data 2 cable (re: Blu wire and Blu/Wht wire).
Bottom line...
Connect PG1000 white wire to MFD12 blue wire AND the PG1000 black wire to the MFD12 blue/white wire.

thank you!