PBG Recording Error

[deeez_nutz]

Have SD cards installed and have been using the TZ3 screens for a year. Will be back on boat tonight, but anted to see if anyone had tips on diagnosing problem. The error I believe is PBG recording error, have removed cards and reinstalled them and restarted multiple times. Had anyone experienced anything like this with DFf3D?

 

[Johnny Electron]

When you swipe from the right side of the screen to the middle, are you able to turn ON PBG recording selection? What are the details? Swipe from bottom up, do you have depth shading set to DFF3D? What are the auto fish and seabed shading setup for under HOME - SETTINGS - MULTI-Beam - Initial setup? Do you have 2.05 software in your TZT3? There haven't been any issues that I am aware of.

 

[UtaBoatVan]

Hello,I have the same problem with the PBG recording. I have installed TZT3 12F,SCX-20 satellite compass NAVPILOT 300,DFF-3D, combined transducer Airmar 165T-50/200- ss260.My old heading sensor was PG-700.After I changed it with SCX-20 the PBG recording system started to error,as the text of the error is "PBG missing multibeam deep data".This happens when there is a rapid change of depth. The speed filter is off and this occurs at great depths. Has someone had the same problem ?

 

[cammmo]

Hello,I have the same problem with the PBG recording. I have installed TZT3 12F,SCX-20 satellite compass NAVPILOT 300,DFF-3D, combined transducer Airmar 165T-50/200- ss260.My old heading sensor was PG-700.After I changed it with SCX-20 the PBG recording system started to error,as the text of the error is "PBG missing multibeam deep data".This happens when there is a rapid change of depth. The speed filter is off and this occurs at great depths. Has someone had the same problem ?

"I believe" you need to adjust the depth on the multibeam sounder to enable PBG.

 

[UtaBoatVan]

"I believe" you need to adjust the depth on the multibeam sounder to enable PBG.

Can you explain more exactly what you mean? Thanks in advance!