B
BarentsSailor
Guest
I have a FURUNO PG-1000 heading sensor that used to be plugged using the AD-10 port to my FA-150 AIS. The AD-10 port on the PG-1000 has a bad contact and the heading data is missing in certain conditions (I have replaced the cable so problem comes from the AD-10 plug).
I would like to use the NMEA port on the PG-1000 to output heading data to my FA-150 (the NMEA port never failed so far).
However I have tried different conventional way for NMEA0183 to wire the PG-1000 to the FA-150 but nothing seems to work. I also have changed the port settings in the FA-150 from "AD-10" to IEC 61162-1.
Does someone know how to output NMEA from PG-1000 to a FA-150?
I would like to use the NMEA port on the PG-1000 to output heading data to my FA-150 (the NMEA port never failed so far).
However I have tried different conventional way for NMEA0183 to wire the PG-1000 to the FA-150 but nothing seems to work. I also have changed the port settings in the FA-150 from "AD-10" to IEC 61162-1.
Does someone know how to output NMEA from PG-1000 to a FA-150?