NavPilot500 - PG500

[fredrikbv]

I have a Navpilot 500 with a PG 500 compass.

The status light has flashed a long time. Today I did 3.3 in the operator manual "Correcting magnetic field distortion". After the test the status light was constantly and everything was fine. After an hour's drive with the boat I got 2 error messages. "Rudder drive error" and "deviation alarm" and the status light flashed again.

Read here on the forum that it was recommended with "clearing the memory". After clearing the memory the status light is flashing.

what do I do now? The NavPilot 500 screen says "no calibration".

Is "Correcting magnetic field distortion" the calibration?

 

[Melville]

If you cleared the memory you must re-initialize through the dockside set-up and do the intial sea-trial of rudder zero and compass calibration.