Installing 4 degree wedge, longer bolts needed.

[allrelative]

Installing 4 degree wedge, longer bolts needed.

I am installing a 4 degree wedge for the drs4d on the Seaview Forward Rake 5" Tall Radar Mount. There is also the Seaview Modular Top Plate. The wedge is at least an inch thicker and the bolts are too short. Where can I get the right bolts?
Thanks
Kevin

 

[Marlin My Darlin]

Good morning,

Attached is a excerpt form the installation manual of the DRS4D. It looks like the supplied bolts are M10x25 and anything longer or shorter would be local supply of an M10 bolt in the appropriate length.

 

[allrelative]

Thanks all for the help. Picked up from bolts depot.
For others looking to do the same,

This is the Wedge -- Seaview Direct Mount 4 Degree Wedge F/Furuno Drs4d
SKU: SEARW4-6
Botls – 316 (A-4)
2 10mm x 1.5 x50MM - product # 23497
2 10mm x 1.5 x60MM - product # 23499
The boat runs at 3-4 degree up when running/ this helped a lot seeing small targets

 

[Johnny Electron]

Thanks so much for the follow up and helping others.