Hydraulic pump PR20F12

[beniferous]

I am getting a Rudder Drive error and may have to replace the pump Furuno PR20F12 which was fitted by Furuno Denmark. The specs are 12 volt 2.0 litre per minute flow. The only reference to this pump I can find is on the Furuno.dk site. Is there an equivalent, more commonly available, pump I could use?

 

[Melville]

I believe the HRP17-12 might be our equivalent. Here is a link:

https://www.furunousa.com/en/support/PUMPHRP17-12

To be sure it is the correct pump however it would be helpful to know the cubic inch displacement of you steering ram(s).

 

[beniferous]

Thanks for the quick response. The steering ram is a vhm50dtp which has a displacement of 12 cubic inches (352cc).

 

[Melville]

I'm not familiar with the model you mention, but if you currently have a reversing pump then the model recommended above would be the one to use.