HIGHLIGHTING BOTTOM 20M ON "NORMAL" SIDE?

Septimus

Furuno Fan
Hello Snips,

Still enjoying the FCV-1150 and, as mentioned previously, it craps all over the latest chirp offering from a major manufacturer (even after all the "software updates"), which I have running side by side with the FCV-1150!!
Can you assist me with how to set up the FCV-1150 so that I can only see the bottom 20m (in 'normal' side of split screen) whilst showing standard 5m on bottom lock on LHS of split screen?
Currently, I am getting the bottom 5m on bottom lock side, but getting 0 ~ 80m on non bottom lock side and consequently the trace is too thin (not enough 'depth' and detail).

Regards, Septimus.
 
Septimus,
The FCV-1150 has a couple of different zoom modes for the left side of the display, I know you asked to do it on the right side. Try using the Bottom Discrimination 1/2 or 1/3 instead of Bottom Lock. Either one will give you an expanded look of the tail of the bottom. Page 4 in the operators manual explains more about it.

Snips
 
Back
Top