GP-320B cable connector

[mlundmark]

When relocating my GPS antenna the 7 pin connector pulled off of the cable.
Is there any place to buy a new connector and a guide that shows what wire goes to each pin.

 

[Johnny Electron]

You can replace it by using a 7 pin NMEA cable (000-154-028). (COLOR FOR COLOR)

 

[Deep Blue]

mlundmark,

Here is the wiring colors and pin out for the GP320B that should make it a little easier for you:

 

[mlundmark]

You can replace it by using a 7 pin NMEA cable (000-154-028). (COLOR FOR COLOR)

Does this replace the cable the cable that is bad or just splice the together.

Thanks,

 

[mlundmark]

mlundmark,

Here is the wiring colors and pin out for the GP320B that should make it a little easier for you:

Thanks.

 

[Johnny Electron]

It is a cable with connector with open wires at the end. You would splice it together with the factory cables (COLOR FOR COLOR) to restore the 7 pin connection. You can't buy the connector. These connectors are hermetically sealed (melted) onto the cable during manufacturing. If you want to have the 7 pin connection back, this is the way to do it.

 

[mlundmark]

thank you sir