Fitting kit for PUMPOCT10-1ma

[Larman]

I bought a Navpilot 300 but the pump I got with it is the wrong size. The pump size I need is the Octopus 10-12 which I purchased. I am having trouble finding the right fittings for the pump. I bought 1/4 inch NPT that will screw into the 10-12 but the hose for the pump will not screw on to those fittings. The orifice of the fitting is too small to allow hose to attach to the fitting?

 

[JJ Neutron]

I think the document in the below link may be helpful to you. It calls out the OC17SUK42 - Octopus Hydraulic Autopilot Installation Kit 30"" hoses and fittings.

https://www.furunousa.com/-/media/sites/furuno/document_library/documents/manuals/public_manuals/octopus_pump_installation__guide.pdf

 

[Larman]

I purchased the 1/4” npt but they will not attach the furuno hoses?

 

[JJ Neutron]

There are so many different types of fittings and thread pitch for hydraulics it's hard to tell, it may help to get a local dealer involved that does that hydraulic work. You may be able to find someone close by on the Furuno dealer locator. https://furunousa.com/en/company/find_a_dealer