fcv 292 sounder rgb/vga output

kadir53

New member
Hi all friends of furuno users. I have an fcv 292 fish finder and I want to get an rgb/vga output on lcd display from it. İs it possible and could anyone make it before? Some furuno models can be for example we made it on 1500 radar and csh 71 sonar. Thnaks for all.
 
Dear moderator;
I want to ask something else about 292 output changing settings. I will change the output power 1kw to 3kw according to operator manual
But no s1 dip switch and j10/j11 jumper to change on the main board. Why dosnt mainboard have these switch and jumpers?
And also ı want to learn that increasing transducers outputs for watch deeper sea or use longer life ? Thanks for all.
 
kadir53,

If the unit is a FCV292, then it should have a 02P6208 Main Board, and it should have a DIP Switch that is located on S1 for selecting the Unit's Frequency, and Jumpers used for the Transducer Output Power used on both JP11 (for the Low Frequency) and JP10 (for the High Frequency).

- Deep Blue :)
 
Back
Top