FCV-1100L connection to RD-30

[Anonymous]

Currently the RD-30 has only power connected. No sensors of any type. How do we connect the RD-30 to the FCV-1100L to read the temperature that is displayed on the FCV unit? If additional cables or parts are required what are their part numbers? Thankyou and have a good day.

Rich

 

[Snips]

Wirewizardmarine,
The RD-30 power cable also has a NMEA 0183 input on the Yellow/Green wires. If you buy the six pin NMEA cable (000-154-054) for the FCV-1100 you should be set. Use the White and Black wires to connect to the RD-30 Yellow and Green. White to Yellow and Black to Green. You will need to go into the FCV-1100 menu to enable the temperature output.

Snips

 

[Anonymous]

Thanks Snips for the fast reply and the usual excellent help. Have a great day.

Rich.