Engine monitor on Tz Touch 2

[bfeehan911]

I have 2004 Yamaha F200s with digital gauges. First question is can these engines be hooked up to the TzTouch 2 to monitor them? Second question is if so, what all do I need to do this?

 

[Quitsa]

I went through this myself with a Yamaha F115. There is a quite helpful Furuno tech document that explains which motors are compatible and how to set up the interface, which I have attached. Yours may be too old and thus require a third party analog to NMEA 2000 bridge, however, which will get expensive and complicated.

 

[bfeehan911]

Thanks. Appreciate the info