DOUBTS CONNECTION FURUNO MB1100

[Anonymous]

Hi, i have a furuno 526t-hdn to connect to a fcv-585 sounder with the furuno MB-1100 matching box.


is there any scheme to connect this transducer to the MB-1100?
can I connect the transducer temperature sensor with te MB-1100?

Thanks in advance.

 

[Johnny Electron]

The MB1100 matching box will only match the transducer not the temp. You can take the temp wires directly into the FCV585 on the power cable accessory temp wires. (Brown & Orange).

When wiring the MFD1100, the 10 pin connector will connect to the FCV585. The transducer High freq (200khz) transducer wires will connect to Pin 3 (+) and Pin 4 (-).
The low freq (50khz) transducer wires will connect to Pin 2 (+) and Pin 5 (-).
The overall transducer cable shield wire will connect to Pin 1.

 

[Anonymous]

Awesome the speed and clarity of explanation.

Thanks again.