Can I use RCU017 of RPU15 to my RPU014 ?

[linhkienbodam]

I am using 1943CBB radar, my RCU-017 Keypad Controller is broken, I bought a good one from my local furuno service that using for RPU015, when I connected it to my RPU014, it worked well but beeps consistently, not a short series of beeps as usal. So can I use RCU017 of RPU15 to my RPU014 ? Thank you

 

[FishTech]

It should work fine as long as it is in good working order and the cable is good. They are the same part number.
You might need to take it back to them and see if it works on the RPU105 that it was connected to previously.
Is there any alarm indication on the display when the beeping is occurring?

 

[Johnny Electron]

Make sure it is connected to the correct port as well. Some of the connections are the same pinout and it might be connected to the wrong port.

 

[linhkienbodam]

It should work fine as long as it is in good working order and the cable is good. They are the same part number.
You might need to take it back to them and see if it works on the RPU105 that it was connected to previously.
Is there any alarm indication on the display when the beeping is occurring?

Yes, they tested it worked well with RPU 015. It runs well with my RPU 014 now but just wonder the alarm sound, it beeps and keep lasting, not short series beep

 

[linhkienbodam]

Make sure it is connected to the correct port as well. Some of the connections are the same pinout and it might be connected to the wrong port.

Yes, It was pluged to port 4 of RPU014