TZT12F with B285M

[brinkis]

Hello Folks,

I plan to install a new B285M with my TZT3.
The transducer comes with 10PINs cables so I still need to use the 12 PIN connector of the TZT3.

Do I need to buy a special connector or use the TZT3 existing one and manually connect the color-coded cable?

Also, I have an existing B258LH Transducer, so wondering if I can combine both transducers together into the TZT3 and select the one alternatively?

Thanks!

 

[Johnny Electron]

A Furuno 10 pin transducer is normally directly connected to the TZT3 by using the 10 pin to 12 pin adaptor that is included in every TZT3 box. If the B258 is a Furuno model (525TID-BHD) then it would connect using that provided adaptor. (Unless it is a TZT9F, which has a 10 pin), Yes, it is possible to use the B285M connected to one TZT3 and then use the Furuno 525TID-BHD connect to a diffrent TZT3 display.