Question for the Furuno AP guru's;
I'm installing a NavPilot 300 on my 1994 Albemarle 247 Express with a Volvo DP and I need to order the correct pump size.
I called tech support today and gave them the Volvo part number of the actuator (852741) and was told you guys need the fluid displacement.
So I turned the steering wheel hard over lock-to-lock and the fully extended chromed area showing was right at 6.5 inches. The piston diameter was 17mm.
Is that enough information for you to determine which pump I need, or do I need to completely remove the actuator and physically measure the fluid displacement?
One more thing, do I need to order the Pg700 sensor, or will my TZTouch2 12 work?
I'm installing a NavPilot 300 on my 1994 Albemarle 247 Express with a Volvo DP and I need to order the correct pump size.
I called tech support today and gave them the Volvo part number of the actuator (852741) and was told you guys need the fluid displacement.
So I turned the steering wheel hard over lock-to-lock and the fully extended chromed area showing was right at 6.5 inches. The piston diameter was 17mm.
Is that enough information for you to determine which pump I need, or do I need to completely remove the actuator and physically measure the fluid displacement?
One more thing, do I need to order the Pg700 sensor, or will my TZTouch2 12 work?