Navnet Touch continuous reboot

Greggmanson

New member
Have a NavNet Touch that’s been working normally for 3 years. Today, it starts and continuously reboots every 2/3 minutes. Nothing has changed on the boat re electronics or power.

Any ideas on a cause?
Gregg Manson
55 Fleming
Golden Daze
 
Greggmanson":sdxfbels said:
Any ideas on a cause?

Hmm :think

Often these issues occur due to:
- Low Voltage / Current (Are the batteries reading 13.2v - 13.6v or more like 12.1v - 12.3v?)
- Old or expired batteries (what's the exp. date on the batteries?)
- NMEA2000 Bus issues (Disconnect the NMEA2000 drop cable and try booting)
- LAN / Ethernet Hub Issues (Disconnect the ethernet and try booting)
- Corrupted chart card (Take the chart card out and try booting)

If you've checked these all out, you can contact Furuno USA technical support and/or send the unit in for a service repair evaluation.

Hope this helps, :sail

- Maggy
 
Back
Top