I currently have the Commercial FA-150 unit for a recreational vessel. From the transponder I have one remote display, as well as through COM2 connected through the Furuno: If-NMEA2K2 (NMEA Data converter) which is feeding into my NMEA2000 backbone. From the backbone I am feeding the NMEA2000 data through an Actisense NGT-1 (USB) for data coms to a PC (TimeZero). I am not confident that it is all hooked up correctly, as I have just taken over as Captain. I am getting poor GPS signals, lost AIS data, heading compass loss etc.
I understand that a lot of isolated events can be going on, but I first want to be sure that the "Furuno Data Converter" is wired correctly into Com2 within the FA-150 transponder box.
Thank you for all thoughts and considerations in advance.
I understand that a lot of isolated events can be going on, but I first want to be sure that the "Furuno Data Converter" is wired correctly into Com2 within the FA-150 transponder box.
Thank you for all thoughts and considerations in advance.