Just installed a new TZTL12F, BBW, DRS4DNXT and everything works great except occasionally the radar stops transmitting and goes to standby. Happened 3 times in 2 hours on Sunday.
There is no indication power is lost to the radar and touching the transmit button starts it right back up. The radar is connected to an industrial grade 10/100/1000 ethernet switch (non-POE, non-Furuno) on the uplink port and the BBW and MFD are connected to other ports. I have tried running with and without grounded shield wires. NO DC powered equipment running on the circuit. BBW shows no interruption of service. Has anyone experienced this or have any ideas what might cause this? Other than this it's great stuff!
There is no indication power is lost to the radar and touching the transmit button starts it right back up. The radar is connected to an industrial grade 10/100/1000 ethernet switch (non-POE, non-Furuno) on the uplink port and the BBW and MFD are connected to other ports. I have tried running with and without grounded shield wires. NO DC powered equipment running on the circuit. BBW shows no interruption of service. Has anyone experienced this or have any ideas what might cause this? Other than this it's great stuff!