Can't Use Radar Separate Range In different MFD Of system.

[Jimmy]

Dear Furuno Team,

I Have TZTL12 / TZT12F / SCX20 / DRS-25a-NXT (Only One Radar Antenna) / HUB-101 Integrate in system network.

The Radar Furnction And DATA all good, when try to set Radar app on different range at TZTL12 & TZT12F separate use,but not allow.
[ Ex: Set the Radar 1 (long range) on TZTL12 ; Radar 2 (short range) on TZT12F ]

The TZTL12 Software V8.1 ; TZT12F Software V3.50

Could you please help me how to setting it , Thanks.

 

[FishTech]

Because it is a shared antenna, what you do on one display will be mirrored on the other display when using the radar.
The only way around this is to set one MFD to show "dual range" radar and adjust the right side radar screen. The left side of dual range is the same image as a full screen radar.

 

[Jimmy]

Hi Fishtech,

Thank you for your reply.
Noted, I think add 4D-NXT Antenna use to short range will easy for me ,right?

 

[FishTech]

Yes. If you add another antenna, both displays can look at their own radar antenna.

 

[Jimmy]

Thank you.