TZT19+TZT 9

[marouane sami]

HELLO
_ Installing two TZT 19 and one TZT9: OK
_ How can I install the card on TZT by USB after unplugging this USB?
_ How can I share this card on ALL 3 TZT through hub101?
Thanks.

 

[FishTech]

What card are you trying to share?

 

[Mr. Limpet]

Hi marouane sami,

Not sure what you mean when you say "install the card by USB".

Charts (Chart Cards) are not shared across the network, but the unlock codes are. One unit should be the chart master, and the other unit should have that feature turned off.

 

[marouane sami]

I'm having the same problem with two tzt 12

I need the tzt12 N1 to be the chartmaster since that is the unit ID i used to by the C-map maps.

The tzt12f N1 shows that it is the chart master but the tzt12f N2 still says no chart master detected.

I also tried making sure the tzt12 N1 was fully booted up before turning on the tztl12 N2. Still the same problem.

Sounds like the units aren't talking but they show up in each others sensor listings. The radar and GP-330B... are connected to the tzt12 N2 and the tztl12f can control them and display the data.

 

[FishTech]

Does it give you a yellow notification that there is no chart master detected?
If you are only going by the first photo provided, that is a normal indication when another unit has been selected as chart master.