Hello all..I recently swapped my old Furuno Navnet 1 for a Vx2, and it appears my radar is off by 90 degrees. Chart plotter is fine. The unit came from one of our work boats so I know it works fine, boss just upgraded all the electronics. Looking to figure out how to get the heading straight. Radar is rsb-0070 open array. Thanks in advance.
Radar Heading
- Thread starter gregb5220
- Start date
Can you provide the RTR number? It is located on the decal & it is buried in the FCC ID xxxxxxxxxxRTR####
Besides the install manual (not ops manual), you might try following the radar setup information I posted here..
viewtopic.php?f=4&t=3443&hilit=heading+align#p12602
Proper setup and heading is important.
viewtopic.php?f=4&t=3443&hilit=heading+align#p12602
Proper setup and heading is important.
Locrasto
Member
Funny this came up, dealing with the same thing right now, I am trying to get my heading set. Using a intercostal marker I can get the radar to match the marker. Heading and cog match by a degree for the most part. But on overlay mode the land is off from the radar. Not much. Chart offset a option but then my tracks going into my lagoon would be on land. I have c-map form 2024
Similar threads
