DRS6A Not working w TZT2 MFD

[Moonzy1]

I upgraded my network from MFD12 to TZT12 screens and my Radar won't work.

I did the incremental update before I removed my MFD12's and had the Radar working w the new screen when I tested.

Now it will not recognize the radar.

Checked power and swapped network cables. All is well.

Any ideas?

Thanks

 

[Moonzy1]

By the way
I hooked up one of the new screens and the radar directly to the Power supply to test.
Just to eliminate other variables.

 

[Johnny Electron]

What power supply are you using? If it is the PSU012, you MUST have jumper J7 installed or the power supply won't turn on to provide power to the radar.

 

[Moonzy1]

Jumper installed
48volts all the way up in the gearbox

Swapped network cable too. No love

 

[Moonzy1]

Furuno support telling me to combine the ethernet cable from the radar and combine w the mfd to go directly to the mfd input of the power source

 

[kicker]

If you are getting 48 volts up top to the radar antenna and tried a new network cable, I would recommend trying to redo the software update using a PC.

Please use the link below to access the software and instructions. Download and follow the steps for the PC 1.16 software update.

https://furunousa.com/en/support/DRS6A

 

[Moonzy1]

Just did this
All is well now
Thanks for answering

Although it’s 1.18 update no?

 

[Johnny Electron]

Yes it is 1.18. You need 1.16 or better. The software he provided is 1.18 so you are in great shape.