Connect single 525TID-BHD to 2 TZTL2

[Scampi]

Hi there,

We are designing the cable-plant for new electronics the majority of which is Furuno.

We have one thru-hull transducer (525TID-BHD) and two MFD (TZTL215F/TZTL212F) separately located in the fly bridge and cabin helms.

We are looking for recommendation as to best way to share the transducer data feed with both of the MFD at the same time.

Thanks!

Renee

 

[Snips]

Scampi,
With two MFD's you will have two sounders. How I would approach this would be to connect your transducer into the lower helm MFD (I assume this will be your TZT2F-15). When you network your MFD's together you will see that your will have two options that will appear as available sounder sources, one will be your TZT2F-15 and the other will be the 12. If you select the TZT2F-15 that sounder will appear on both MFD's. One note, put the unused MFD sounder in the stand-by mode or it will start transmitting with no load (transducer connected).

Snips