After launching this past week my transducer isn’t working . Quick back round , all new equipment installed Nov. of 2020, 2 - 12 inch TZ3 ,B275LHW transducer, scx20 , plus open array radar, plus the old B60 transducer left in. This past winter I installed an amp under the dash , the only new item to the boat. Through process of elimination I narrowed it down to the transducer . I reset the transducer with Furuno on the phone no change . I disconnected the power going to the amp, no change , and today I switched the transducer wire from one machine to the other , no change . Is the something I may be missing to do ? The pictures is what it’s doing , switching back and forth never locking onto the bottom. The B60 works as it’s supposed to.