50 bl12 hr and ss264 through matching box on 585

[nicko]

I currently have a ss264 wide 200 hz running off a 585 and a 50 bl 12 hr running through a matching box
.
If I want to switch transducers I currently just swap the plugs in the back of the sounder
I wanted to know if I could run them both through the matching box or get some sort of splitter so I can them both at the same time
Thanks Nick

 

[Snips]

Nicko,
Just so you know, neither of those transducers are a good impedance match for using a matching box and you are losing performance by using it. That being said, the matching box has two outputs i.e. LF and HF. So you can connect your 264 to the HF side as your 50-12HR is connected to the LF.

Snips