We are using all of these products on our boats. We have a number of spare displays and I would like to add a second display to the SC-110 (or others). I am more concerned at being able to show compass data output from the SC than with controlling the unit.
Is there anyway I can connect a display either to a data port to get data display (I realize that these ports are TX only) or connect using for example the beacon RX/TX port ? Of course I would also need 15v from the display port - if there is enough power for 2 displays.
Alternatively would it cause a problem if I connected 2 displays in parallel but cut the 2nd display unit's TX line on pin 3
Richard
Is there anyway I can connect a display either to a data port to get data display (I realize that these ports are TX only) or connect using for example the beacon RX/TX port ? Of course I would also need 15v from the display port - if there is enough power for 2 displays.
Alternatively would it cause a problem if I connected 2 displays in parallel but cut the 2nd display unit's TX line on pin 3
Richard