Use Existing Transducer with my New TZTouch2

drewc228

Member
Apologize for the cross post to TZTouch2 forum but I am new to this space and trying to ensure I get this in front of the right folks.

Just installed a new TZTouch2 12" and would like to use my existing Airmar 50019 600W 200KHZ TRIDUCER DEPTH SPEED TEMP. I know this is an oldie, but it is still operational and seems to work well with my FCV-582L. Apart from matching the 7-pin connector to the Furuno 10-pin, and perhaps some fine-tuning of the specs, can I expect a decent amount of information to be displayed on the TZ, or am I doomed to a haul out and new Xducer. Thanks!
 
Drewc228,
Try the 525STID-MSD. In reality there is not that much difference in the 600 watt transducer elements. The menu setting is more to tell the sounder what database to use for the ACCU-FISH or Bottom Discrimination modes.

Snips
 
Back
Top