Which black box fish finder?

I have a customer who would like to use his old Simrad transducer with his new TZT14. This is a 38 and 200 khz combo transducer rated at 1000 watts.

The Simrad transducers spec sheet is here: https://www.simrad.com/www/01/NOKBG0397 ... penElement

I think I can use the DFF3 but want to make sure .....

Thanks for your help

GWB,
If you are 100% sure the transducer is rated for 1kw you can use the DFF3 with an "A" tap setting for both frequencies. However, a few of these Simrad Combi's were not 1kw so be sure it is. I know of two cases where the transducer was "thought" to be 1kw and it turned out to be much lower.

Snips

Roger. Thanks Snips. What other BB fish-finders would work with the simrad transducer? I'm looking for the most cost effective way to interface this transducer with the TZT14. Thanks again for your help

GWB,
If you had a 50/200 transducer you could try the DFF1, but since it is 38/200 the DFF3 is the only option.

Snips