GP-1870F data integration with RDP-142 (Radar 1715)

N

nawar76

Guest
How to integrate those two devices so that both will display the needed data info. As for now RDP-142 is attached with Radome Scanner/sensor only, while GP-1870F is attached with GPS antenna, sounder and heading sensor.
 
The 1715 uses NMEA 0183 and the GP1870F uses NMEA 2000. You will need to build a small NMEA 2000 bus and use a converter like the Furuno IF-NMEA2k2 to convert the 2000 data to 0183 so you can wire that to the 1715. You might look at some of the example interface drawings listed under the GP1870F on our product page.
 
Back
Top