GP-1870F data integration with RDP-142 (Radar 1715)

GP-1870F data integration with RDP-142 (Radar 1715)

Postby nawar76 » Sun Feb 04, 2018 11:59 pm

How to integrate those two devices so that both will display the needed data info. As for now RDP-142 is attached with Radome Scanner/sensor only, while GP-1870F is attached with GPS antenna, sounder and heading sensor.
nawar76
Member
Member
 
Posts: 1
Joined: Sun Feb 04, 2018 10:40 pm


Re: GP-1870F data integration with RDP-142 (Radar 1715)

Postby Johnny Electron » Mon Feb 05, 2018 8:06 am

The 1715 uses NMEA 0183 and the GP1870F uses NMEA 2000. You will need to build a small NMEA 2000 bus and use a converter like the Furuno IF-NMEA2k2 to convert the 2000 data to 0183 so you can wire that to the 1715. You might look at some of the example interface drawings listed under the GP1870F on our product page.
Johnny Electron
User avatar
Johnny Electron
Moderator
Moderator
 
Posts: 3367
Joined: Tue Sep 06, 2011 4:26 am
Location: USA


Return to GPS Chart Plotters

Who is online

Users browsing this forum: No registered users and 1 guest