Page 1 of 1

SWEEP ERROR 2117

PostPosted: Sun Jan 07, 2018 6:14 pm
by TUGNICOLE
I'm seeing a decreasing spiral on the radar display. IR doesn't remove it, it is intermittent.
interestingly, the second 2117 on board displays an increasing spiral in the same fashion.
both are connected to NavNet in concert with an ECS.
Any ideas?

Re: SWEEP ERROR 2117

PostPosted: Tue Jan 09, 2018 5:29 am
by Johnny Electron
Please contact your local Furuno distributor for assistance. The larger commercial radars are beyond the intended scope of this consumer based product forum. If you don't know your local distributor, they are listed at www.Furuno.com by country. If you are a Furuno USA customer please call or open an official case at www.FurunoUSA.com - Get Support - Ask a Question.

You can also reach Furuno USA tech support at the following numbers:
Camas, WA - (360) 834-9300 - 8:00am - 5:00pm PST Monday-Friday
Denton, MD - (410) 479-4420 - 8:00am - 5:00pm EST Monday-Friday