help identifying

help identifying

Postby saburke17 » Thu Aug 17, 2017 8:09 am

Hey Everyone i'm Sean, just purchased a 31 Bertram that has some Furuno stuff on it. Just looking for some feedback and help identifying them. It had a radar array but someone stole it, all the plugs are still there. the boat has been in storage for 5 years outside but the screens were covered. the Navnet has no card in the slot when you open the door, Do i need a card for this unit and which array type will work with this system?

Thanks for the help

https://www.dropbox.com/s/t1bib9jbd7kty ... 1.jpg?dl=0

https://www.dropbox.com/s/7r2c3bxbi12t8 ... 8.jpg?dl=0
saburke17
Member
Member
 
Posts: 2
Joined: Thu Aug 17, 2017 8:04 am


Re: help identifying

Postby Johnny Electron » Fri Aug 18, 2017 10:34 am

The first photo is of the FCV582L fish finder. Here is a link to the product on our website. You will find the manuals in PDF format there.

http://www.furunousa.com/Products/Produ ... sh+Finders

The second unit is a 7" NavNet series one display unit. (roughly from 2002)
You can use this link to get a basic idea of the unit.
http://www.furunousa.com/Products/Produ ... %3a+Radars

If it was running a radar before (has the radar connector); It will say either RDP130, RDP131 or RDP143 on the back part number label. It will support one of the following radar scanners (using the correct cable).

RSB0087-070 18” Radome
RSB110-070 18” Radome ***
RSB0071-058 24” Radome
RSB0047-051 2’ (26”) Array
RSB0070-065 41” Array ***

**Still available to be sold new from your dealer (as of this date)
Johnny Electron
User avatar
Johnny Electron
Moderator
Moderator
 
Posts: 3510
Joined: Tue Sep 06, 2011 4:26 am
Location: USA

Re: help identifying

Postby saburke17 » Sat Aug 19, 2017 5:53 am

Johnny thanks for the reply, if i wanted to upgrade the navnet, is there a direct plug and play unit i can swap it with? something larger maybe?
saburke17
Member
Member
 
Posts: 2
Joined: Thu Aug 17, 2017 8:04 am

Re: help identifying

Postby Johnny Electron » Mon Aug 21, 2017 9:42 am

The 7" NavNet Vx2 is the next system after your NavNet one. It would be plug and play, but that is no longer sold new. All of the current systems use newer digital radars that are not compatible with the older analog radars.
Johnny Electron
User avatar
Johnny Electron
Moderator
Moderator
 
Posts: 3510
Joined: Tue Sep 06, 2011 4:26 am
Location: USA


Return to NavNet vx2 & NavNet 1

Who is online

Users browsing this forum: No registered users and 3 guests