navnet vx1 nmea feed

A

Anonymous

Guest
hi guys
sorry for the dumb question
however i have been having problems with connecting via nmea
a friends vx1 10.4 display to a furuno gp30 to provide position.
i used data 4 and also tried data 1 to no avail.
i used the green and yellow from the display to the blue and white on the gp30
can you please advise
regards
mick
 
Rodman,

You must use NEMA DATA Port 2 to supply NMEA0183 position to the Navnet VX1 from the GP30.

Navnet VX1 Data Port 2 RD-A Yellow to GP30 TD-H White
Navnet VX1 Data Port 2 RD-B Green to GP30 TD-C Blue

After completing the wiring, now you have to set-up the data ports on both the VX1 and GP30

VX1: Press the [MENU] key to open the menu
Press the SYSTEM CONFIGURATION, SYSTEM SETUP and PORT SETUP soft keys
Press NMEA PORT for DATA 2 port
Select item and press the EDIT soft key
Set options and NMEA data sentences

GP30: Press [MENU] twice to display the unit's MAIN MENU
Use the Cursor Pad to select I/O SETUP.
Press the [ENT] key
To change setting, press the Cursor Pad's down arrow to select DATA 1, DATA 2, or the NMEA VER.
Press the [MENU] key to finish

Hope this helps, good luck.

Deep Blue
 
deep blue thank you very much for your reply.
wonderful customer support once again from furuno
best regards
mick :furuno
 
Back
Top