Software update problem

bluewing

New member
Was not able to update software on my RDP-148 and 149 units on my NavNet VX2 network.

I get a blank screen and no beeps. I followed the instructions to a tee!

I formatted the SD card in the FAT format and only copied the files related to the unit I was trying to update.

I get the same reaction for both units, which makes me suspect a problem with the SD card.

Any suggestions?
 
195002804.01,07 on the rdp148
195002404.01,07 on the rdp149

SD card is a SanDisk 16GB 48MB/s, Ultra Plus.

RDP148 keeps freezing up. Have to restart it to unfreeze it. Keep getting messages such as connection to the ETR lost, or connection with the radar lost. Tech support told me to update software to see if that resolves the problem. Been trying to do that.
 
You currently have v4.01 software. It should upgrade to the newest (v4.03) fine BUT you have to use the correct sized memory card. The Vx2 is limited to read up to 2GB. It can NOT read a 16GB chip. Try using a smaller SD card and the update should work fine.
 
Back
Top