VX2 Network setup connect DSC function to VHF

A

Anonymous

Guest
35 Contender, 2008, Navnet VX2 10 inch and VX2 7 inch, networked .

The 10 inch unit has all data-out ports filled to the radar, the 7 inch, network etc.

I am trying to connect the DSC function to a standard Horizon Explorer VHF. Can I used the data ports out from the 7 inch unit to do this? I have data 1, data 2 ( heading only), and data 3 open on the 7 inch unit.

Thanks in advance for any help...
 
Thanks Johnny. With that info and some troubleshooting I was able to get the DSC working. I want to put the info here in case someone else is trying to wire from the 7 inch to the Standard Horizon Explorer, my final setup.

A) Both GPS and VHF must be grounded together
B) GPS + yellow to VHF gray
C) GPS - green to VHF green AND brown
D) GPS white to VHF blue
 
Back
Top