C
CaptainRoberts
Guest
New boat, new project! It's a bit of an electronics mess I would like to get sorted out and networked properly.
There are two 2013 MFD8's and a Lowrance 9200c w/ 4kw Radar in the overhead box.
https://www.lowrance.com/Root/Lowrance- ... 100906.pdf
Left MFD8 has only an NMEA 0183 gps antenna connected
Right MFD8 has an ethernet connection going to a DFF1 that is connected to an Airmar transducer. (Not sure which one yet)
I have two Airmar Transducers; (I think the B164 is not connected)
Smart IDT-N2000
PN 44-129-3-02
235kHz Jlq
DT812PV-235-N2
Firmware 1.022 Rev 06
Tilted Element B164-12
50/2000kHz Glq
PN 41-451-2-01 Rev 01
B164-12-MM
I would like to network the Furuno MFD's and if possible read Radar info from the Lowrance. (looks like it may be possible via NMEA2000?)
Also can an Airmar transducer be connected directly to an MFD? I would like to have the option of which sounder to display.
There are two 2013 MFD8's and a Lowrance 9200c w/ 4kw Radar in the overhead box.
https://www.lowrance.com/Root/Lowrance- ... 100906.pdf
Left MFD8 has only an NMEA 0183 gps antenna connected
Right MFD8 has an ethernet connection going to a DFF1 that is connected to an Airmar transducer. (Not sure which one yet)
I have two Airmar Transducers; (I think the B164 is not connected)
Smart IDT-N2000
PN 44-129-3-02
235kHz Jlq
DT812PV-235-N2
Firmware 1.022 Rev 06
Tilted Element B164-12
50/2000kHz Glq
PN 41-451-2-01 Rev 01
B164-12-MM
I would like to network the Furuno MFD's and if possible read Radar info from the Lowrance. (looks like it may be possible via NMEA2000?)
Also can an Airmar transducer be connected directly to an MFD? I would like to have the option of which sounder to display.