DFF3D Initial setup

DFF3D Initial setup

Postby flowmotion » Mon Jan 29, 2018 6:11 pm

UPDATE: I requested this information from technical support. It is not currently documented anywhere.

EQUIPMENT: TZtouch2 mfd, 165T-B54 transducer (thru hull mount in transducer flat)

QUESTIONS: I need clarification on the inputs for the DFF3D intital setup menu for the transducer.

Motion Sensor Menu.

1) how do I set the roll sensor offset? this parameter is not defined anywhere.
2) same question for the pitch sensor

In summary, the manual does not define some of the required parameters.
Posts: 22
Joined: Tue Dec 12, 2017 9:09 am

Re: DFF3D Initial setup

Postby Johnny Electron » Wed Jan 31, 2018 7:46 am

You only need to adjust the offsets if you are using a SC30 sat compass or similar. If you are using the sensor in the transducer, don't change anything.
Johnny Electron
User avatar
Johnny Electron
Posts: 3367
Joined: Tue Sep 06, 2011 4:26 am
Location: USA

Return to NavNet TZtouch2

Who is online

Users browsing this forum: No registered users and 2 guests