Page 1 of 1

TZT2, IF-NMEA2K2, Standard Horizon GX 2200

PostPosted: Wed Jan 10, 2018 11:06 am
by starbright55
Everything is still boxed in my office and won't go on the boat for another month or two. I'm still in planning mode, getting things ordered, etc.

The Standard Horizon outputs VDM at 38,400 baud on the GREY + and the BROWN - wire

I know I will need to put the IF-NMEA2K2 into AIS mode by cutting the PORT 2 (PPL) wire.

There are 4 options on the IF-NMEA2K2 to connect to:
YEL or PNK*1
GRN or PNK/BLK*1
BLU or L-BLU/GRN*1
WHT or L-BLU/YEL

The GREY from the GX 2200 goes to which wire on the IF-NMEA2K2?
The BROWN from the GX 2200 goes to which wire on the IF-NMEA2K2?

EDIT: Yes, I've seen this thread and it doesn't help.
viewtopic.php?f=28&t=3972

Re: TZT2, IF-NMEA2K2, Standard Horizon GX 2200

PostPosted: Fri Jan 12, 2018 7:27 am
by Johnny Electron
The GREY from the GX 2200 goes to which wire on the IF-NMEA2K2?


L-BLU/YEL (+ input)

The BROWN from the GX 2200 goes to which wire on the IF-NMEA2K2?


L-BLU/GRN (- input)