I currently have the option of 2 TZT2 screens connected with the DFF3D multi beam sonar and the 165T-B54 Transducer. I also have a FCV 1150 bottom machine with the R109C 2KW Transducer that operates on it's own. What would the recommendation be for a transducer to really take advantage of the TZT2's built in Bottom machine taking into account it would be used as a back-up in water 5' to 600' without having to add another Black Box (DFF1)?? As far as I know the TZT2 is not Chirp capable without the black box which I'm good with. I am hoping there are some 1KW options that will be able to really take advantage of the built in TZT2 capabilities. The 2 Transducers I'm using now are in Fairing Blocks and I'd also prefer not adding a third if I don't have to!! So are there any transducers out there that will fit the bill and work well with the built in Bottom capability of the TZT2??
Transducer Recomendation
- Thread starter Driftin2
- Start date
M
Melville
Guest
We offer a single combo transducer for the DFF3D and TZT2 internal sounder.
https://www.furunousa.com/en/products/1 ... -200-ss260
https://www.furunousa.com/en/products/1 ... -200-ss260
You might take a look at the link below for our DFF3D transducer guide which is posted on our website under the product. It will show you the transducer options for the DFF3D and differences between yours and the one Melville has suggested.
https://www.furunousa.com/-/media/sites ... _guide.pdf
https://www.furunousa.com/-/media/sites ... _guide.pdf
Similar threads
