Linking TZT to TZT2

MikeR13

Furuno Super Fan
I already have a TZT system installed and i will be adding a tzt2 and the DFF3D to the system. Do i need to do anything special to link the two screens together? Or is that simply done by the NMEA. I am having my marina do the install just want to make sure I'm not missing anything.
 
They would connect up via a network hub. They will join by Ethernet and also by NMEA 2000 bus if you have one. Minimum you would have the two units connected by Ethernet. The two units, the sounder, and any other Furuno network items (like digital radar) will connect to the hub.
 
Yes you would need to buy one. If the boat is 12vdc, you can use an off the shelf hub easy enough. If you have a 24vdc system, then you would want to get the Furuno Hub101 or other hub that supports 24vdc.
 
Back
Top