Multiple TZT2 chart issue.

GEG

New member
Have a TZT2-12 and a TZT2-15 installed with NXT radar. All networked and working exceptionally w/exception of one issue. When the chart screen is active on both units, the chart enlarge/shrink function on one mfd works both mfd's at the same time. In other words, what I see on one screen is duplicated on the other. Is there a way to un-synch the two mfd's so that differant aspects can be viewed at same time, e.g., one up close and one longer range? Is there an un-mirror setting?
 
Home>Settings>Plotter scroll down and turn off "Range Link"

You probably have it turned on for both units. What this does is keep the radar overlay on the chart to a scale that makes it look and function the best. When you zoom in or out on the chart, the radar will follow suit. Having this on for both units is causing them to mirror each other. Pick the one you do not need the radar overlay on and turn off range link and you should be good to go!
 
Back
Top