'X' and 'O' Symbols on TZT14 Boat Icon

RickVicik

Furuno Fan
When I zoom on my boat icon, 'X' and 'O' symbols appear that move with the boat (see attached photo). I discovered that changing the GPS antenna location in the initial setup parameters causes the 'X' to move with respect to the boat icon.

As originally set up, the 'X' was close to the actual GPS antenna location fore-and-aft but was on the port edge. The antenna is actually on the centerline, so I changed the lateral parameter to make it appear centered on the boat icon.

I'd like to get the 'O' symbol in the proper location as well, but I don't know what it represents or which parameters to change to move it.

Any information will be appreciated.

---rick
 

Attachments

  • TZT14BoatSymbols.JPG
    TZT14BoatSymbols.JPG
    23.3 KB · Views: 1,272
Good morning Rick Vicik,

Do you have a DRS radar on the vessel? I believe the "X" symbol represents the location of the radar, you can change the "X,Y" offsets in the Radar Menu.

c-bass
 
Thanks very much for the info. Changing the radar antenna lateral position parameter to zero moved the 'O' to the centerline of the boat icon.
---rick
 
Back
Top