FELCOM 250/500 LAN Configuration?

FELCOM 250/500 LAN Configuration?

Postby vobal » Fri Jun 24, 2016 1:24 pm

We are relatively new to using Furuno FleetBroadband terminals, but have lots of experience with Cobham/(Thrane & Thrane). I am looking for guidance/feedback on how to setup LAN port 4 functioning as DHCP server to provide a different IP address range than LAN ports 1-3.

For example, LAN ports 1-3 are currently operating with an IP address range of 192.168.8.X. For various reasons, we need to specify LAN port 4 use 192.168.10.X. This is pretty standard on Cobham, but I don't see any documentation in the Furuno operating manual about how this can be configured on the Felcom FBB terminals.
vobal
Member
Member
 
Posts: 1
Joined: Fri Jun 24, 2016 1:16 pm


Re: FELCOM 250/500 LAN Configuration?

Postby Melville » Mon Jun 27, 2016 10:06 am

vobal-

Your question is probably beyond the scope of this forum.

If you are in the USA or Canada please contact our deep sea department at
fusa.deepsea@furuno.com

If you are outside of our territory please contact your local Furuno distributor.

Melville
Melville
Furuno USA
User avatar
Melville
Moderator
Moderator
 
Posts: 807
Joined: Fri Sep 02, 2011 12:33 pm


Return to Communications

Who is online

Users browsing this forum: No registered users and 1 guest