Old ST800 From Raymarine System

syrupdawg

Member
I just ordered 2 new TZT2-12's and hooking them to a DFF3 and R599 transducer. My old Raymarine system has a ST800 speed/temp sensor and I was wondering if there was any way to make it work with a Y cable with the R599 Cable into the DFF3? It is a 4 wire plug coming out of the ST800. If it wont work I need to be ordering a new one that has the right cable.

If I have to order a new sensor do I need a Y cable to connect the speed/temp to the R599? What part number would that be so I can get the right one.
 
Raymarine uses a different value temp sensor than Furuno and other manufacturers are using. You can not use the raymarine sensor with your Furuno sounder.
 
Yes that is one of the suitable options. It will have a 6 pin connection that will plug into the DFF3 connection labeled "Temp". The connection accepts water speed in addition to temp.
 
Back
Top