A
Anonymous
Guest
My VX2 chart plotter was going to cost $2000 to fix so I replaced it with a 12" Simrad EVO 3. The evo 3 and the auto pilot are connected nmea 1083 and while I can use the auto pilot in AUTO, my installer cant seem to get my auto pilot to navigate to a way point. He has tried a few different settings but says it must be an issue that my nav pilot is Version 2.0 and the EVO 3 is a newer software version. This seems unlikely to me and I feel its probably just a simple wiring issue or even a setting that needs to be changed.