VAV PILOT 500- CAN'T CALIBRATE

B

boatman230256

Guest
Hi to all. I'm a new member from Africa. I've just acquired a boat where a NAV 500 wasn't commissioned. Rudder sensor and pump weren't fitted.
Fitted a new pump and bled steering. which works when i press Starboard or Port.
Fitted a rudder sensor which is showing.
When i first switch unit on it goes through self testing and all shows ok.
When i press Menu or Standby doesn't show me the calibration page...
Help please.
 
Press Menu and Stand By together to access the installation menu.
You can download the installation manual as well as the operators manual on our website.
 
Sorry,meant Nav Pilot 500. I have the Manuals. Unit is not responding to Menu or Standby keys...only beeps.
Any help appreciated.
 
Do you have the termination plug on the back of your pilot control head? The control head should have a cable and a termination plug. If you have an empty connector or a dust cap, it would be bad. You MUST have a termination plug to terminate the bus.
 
Back
Top